Core Cutting Contractor in Greater Noida

In Greater Noida, electrical conduit holes start at Rs 500, plumbing holes at Rs 600 and AC duct holes at Rs 800. Wall cutting runs about Rs 120 per running foot and a GPR rebar survey costs around Rs 2,500. Dust-free wet and vacuum drilling is included at no extra charge.

Yes. Our diamond core cutting machines handle RCC walls and slabs up to 24 inches thick. For thicker structures, we use extended core barrels and cut from both sides. We regularly drill through heavily reinforced concrete in high-rise buildings.

No. Diamond core cutting is a non-percussive, non-vibration process. Unlike hammer drilling, it does not send shock waves through the concrete. This makes it safe for use near sensitive equipment, glass facades, and occupied buildings.

Rebar scanning uses Ground Penetrating Radar (GPR) to map the location of steel reinforcement, post-tension cables, electrical conduits, and plumbing inside the concrete. Scanning before cutting prevents accidental severing of structural rebar or live utilities.

Yes. We offer both wet cutting (water-cooled, which produces slurry instead of dust) and vacuum-assisted dry cutting for areas where water cannot be used, such as server rooms, hospitals, and finished interiors. Dust containment is included at no extra charge.

Yes, with proper assessment. We scan for rebar placement first, avoid cutting through primary structural reinforcement, and recommend engineered lintels or frames where needed. For large openings in load-bearing walls, we coordinate with a structural engineer.